4T8/K1T--4 Pin Radio to 8 Pin RIGblaster conversion kit.........................................$21.95

M4/CBL and a 6" inline 4 pin jack to 8 pin adapter and instruction/jumper sheet. NOT FOR NOMIC

 M4/CBL--4 Pin Round Screw On Custom Mic Cable, 3 ft.........................................$14.95

(RJ45 to 4 Pin Mic.) Converts nomic to 4 pin round radios

M8/CBL--8 Pin Round Screw On Custom Mic Cable, 3 ft..........................................$14.95

(RJ45 to 8 Pin Mic) Included with all models.

RJ/CBL--RJ45 Square Custom Mic Cable, 3 ft...........................................................$8.95

(RJ45 To RJ45) Not needed with any current model RIGblaster

FT100/CBL--Yaesu Modular 6 Mic Cable, 3 ft...........................................................$14.95

(RJ45 to Modular 6 Wire) May be used with any model RIGblaster. Must be used to connect an FT-90, FT-100, FT-1500, FT-2600, FT-7100, FT-8100, FT-8500, & FT-8900 to a RIGblaster. The Mic supplied with these radios is not compatible with a RIGblaster or any other sound card interface.

ST/CBL--Stripped End Mic Cable, 3 ft.......................................................................$3.95

(RJ45 to Stripped & Tinned End) Supplied with Nomic Experimenter and may be used with any model to make a custom cable.

CW/CBL--1/4" Phone Plug Mic Cable, 3 ft..............................................................$15.95

(RJ45 to 1/4" Stereo Phone Plug) Not included with any model. May be used as a Mic cable. (Drake & Collins)

DC/CBL-- 12 Volt DC Cord, 6 ft..............................................................................$7.95

For operation from 12 Volt DC mobile operation or use in other Countries

MX/CBL-- 6 ft DB9M to DB9F Serial Cable.........................................................$8.95

Included with all current models. May be used to extend the Serial Cable on any model.

A/CBL-- 1/8" Stereo Mini Plug Patch Cord, 6 ft.....................................................$3.95

For transmit or receive audio, keying or rig control connections

CD -- V6.0 CD ROM of Sound Card Software Collection......................................$9.95

Included with all RIGblasters except nomic EXPERIMENTER

IA/CBL -- Icom ACC1 Jack Audio Cable, 6 ft........................................................$12.95

To connect only fixed level receive audio using an Icom's ACC1 Jack. Works with all RIGblasters and may be used as a receive only connection without a RIGblaster. Not needed if a variable level audio jack is used. The Mic jack must be used for transmit.

IA/FSK/CBL -- Icom ACC1 Jack Audio & FSK Cable, 6 ft..................................$17.95

To connect only fixed level receive audio and FSK keying using an Icom's ACC1 Jack. Works with all RIGblasters but only needed for FSK with a Plus or a Pro. The Mic jack must be used for transmit.

817/CBL -- Yaesu Data Port Audio Cable, 6 ft......................................................$12.95

To connect only fixed level receive audio using a Yaesu's Data Port jack, FT-817 and other models. Works with all RIGblasters and may be used for a receive only connection without a RIGblaster. Not needed if a variable level audio jack is used. The Mic jack must be used for transmit.