NOW SHIPPING THE NEW CBA II
· NEW: Super 12 bit resolution below 3 amps.
· NEW: Perform tests accurately down to 0.1 amps!
· NEW: Updated software and help documentation!
CBA2 -- CBA II Battery Analyzer ***NEW***..............................................$119.95
USB Computerized Battery Analyzer discharges and measures battery performance at up to 40AMPS, 150 WATTS whichever is higher. Anyone can do lab test of a battery. Complete with CD Rom, Software, 6' USB Cable and PowerPole Battery Connector
CBA/TEMP -- Temperature Probe.................................................................$ 12.95
Accessory Magnetic Temperature Probe. Needed for CBA to measure Battery Temperature and to provide automatic temperature cutoff, 6' long with powerful magnet attachment.
FEATURES
· Easy to use and foolproof.
· Perform tests like a pro!
· Analyze exact battery characteristics.
· Match cells or pick the best pack.
· Check for battery aging.
· Cycle and condition batteries.
· Test at up to 150 watts or 40 Amps.
Plug and Play high speed USB interface, with easy to use and intuitive
Windows software supplied on CD ROM.
Scientifically analyzes battery performance with a true constant
current battery capacity test that is graphically displayed.
See Screenshot
Perform tests quickly at real world load conditions, up to 150
watts or 40 amps!
High voltage testing at up to 48 volts; the equivalent of 1 to
38 NiCad or NiMh cells.
Save, display and print battery test graphs and battery labels.
Measures and displays voltage, current, amp-hrs, watts and temperature*.
Easy overlay comparisons of multiple graphs may be displayed saved
and recalled.
Test any type of battery: NiCad, NiMH, Lead Acid, Li Ion, Li Poly,
Alkaline, Carbon Zinc, Mercury etc; from coin cell to automotive
or larger.
Accurate measurement with up to 12 bit resolution. Auto selection
of two current and three voltage ranges.
Each CBA is individually, digitally calibrated, against NBS traceable
instruments.
On board C8051 based USB Micro controller.
Superior, software and electronically regulated, constant current
testing using a solid state FET fan cooled electronic load.
Automatic test shut off at a safe pre-determined minimum battery
voltage. Default shut off voltage may be user overridden.
Automatic test shut off at a for a pre-determined maximum battery
temperature. (Requires optional temperature probe)
Fail safe: software and/or hardware protection of temperature,
current, power and reverse polarity.
Supplied with USB cable and high grade 13 gauge flexible Powerpole
battery test cable. Optional adapters available for most batteries.
Optional external temperature sensor provides measurement of battery
temperature for complete testing.
Maximum test rate: 150 watts or 40 amps, whichever is higher.
Discharge test current user selectable from 0 to 40 Amps.
DESCRIPTION The
CBA is much more than a simple battery voltage tester or a battery
load tester. Unlike a simple load tester the CBA will test virtually
any type or size of battery, any chemistry, any number of cells
up to 48 volts. For the first time and for a reasonable price,
anyone can do scientific tests of their batteries by letting their
computer do all the work.
The CBA is capable of higher test rates than other testers: up
to 40 amps or 150 watts, whichever is higher. It not only tests
the total amount of energy stored in a battery (capacity in amp-hrs),
but it graphically displays and charts voltage versus amp-hours.
Unlike a resistor load it has a constant current load that is
controlled both with software and electronically.
Graphs may be displayed, saved and printed. Multiple graphs of
the same battery, or multiple batteries, may be compared or overlaid,
a very useful feature. Battery tests may be printed on a color
or black and white printer. You may also print convenient test
labels to placed directly on your batteries to remember the last
time they were tested and how they performed.
A CBA will measure the temperature of a battery under test using
the optional external temperature probe. The temperature probe
will provide automatic over-temperature shutoff a preset temperature
limit.
The CBA is ruggedly built and it is supplied with high grade wire
with Powerpole battery connectors. Other connectors may be installed
our you may use our adaptors or make adaptors to the Powerpoles.
A CBA is compact and has a high performance cooling system with
a quiet fan. LED indicators show test status from across a room.
The CBA uses an 8051 based micro controller. Each CBA is individually
calibrated to high accuracy. The electronic load uses a pulse
width modulation system to control a power MOS FET with electronic
and software current regulation. The on-board micro controller
provides the plug-and-play USB interface to the computer.
The software supplied with the CBA is easy and intuitive to use.
It provides automatic sensing of the battery cell count and recommends
a safe maximum discharge current and minimum safe cutoff voltage
for your batteries. The system of software and hardware is designed
to protect both the CBA and the batteries that are tested. We
think that you will find the CBA a useful and essential tool for
anyone that depends on batteries. You will find that you learn
new, valuable, information about your batteries that cannot be
determined any other way. Using batteries without a CBA is like
driving a car without a gas gauge.
SPECIFICATIONS:
* Maximum continuous discharge rate: 100 watts
* Maximum limited term discharge rate with < 3500 ma-hour battery:
125 watts
* Maximum limited term discharge rate with < 1000 ma-hour battery:
150 watts
* 0-3 amp accuracy: typically better than + - 10 ma (12 bit, NEW!
CBA II)
* 3-40 amp accuracy: typically better than + - 45 ma (10 bit resolution)
* 0-5 volt accuracy: typically better than + - .005 volts (10
bit resolution)
* 5-10 volt accuracy: typically better than + - .01 volts (10
bit resolution)
* 10-50 volt accuracy: typically better than + - .05 volts (10
bit resolution)
* Absolute maximum operating voltage: 48 Volts
* Maximum discharge rate: 40 amps (3.75 Volts at test start)(Battery
dependant)
* Minimum Voltage for a 40 amp discharge: 2 volts at completion
of test (Battery dependant)
* Minimum discharge rate: Zero! May be used for charge cycle monitoring.
(NEW! CBA II)
* Residual current drain, battery connected while not in use:
< .003 amps @ 12 volts
* User selected battery cell chemistry, number of cells and test
current, with automatic graph setup and scaling.
* High performance C8051 based micro controller with built in
USB interface and 10 bit A/D conversion.
* USB powered; the CBA does not use the battery being tested to
run the CBA or the fan.
* Software calculates and recommends safe tests based on the user
supplied battery information.
* Supplied with USB cable, Powerpole battery connectors and Windows
compatible software CD with full documentation.
* System ready and Test in progress LED indicators, viewable from
across a room.
* Automatic voltage shut off at end of test using a software recommended
or user selected safe discharge voltage.
* Automatic temperature shut off at end of test at using a software
recommended or user selected maximum temperature.
* Optional external magnetic temperature sensor required for temperature
measurement and/or battery auto over-temp shutoff.
* Internal automatic over temperature shutoff.
* Graph printing on any standard color or B&W printer.
* Battery test label printing on standard 05160 stick-on labels.
* Dimensions: 3.5" H x 2.8" W x 3.6" D.
* Weight: 16 oz.
Computer System Requirements
Minimum Requirements:
A PC 233 MHz or better
At least a 800 X 600 graphics card and display monitor
Windows 98SE, ME, NT, 2000, XP with necessary RAM
An available USB 2.0 or USB 1.1 port.
Recommended:
A PC 1 33 MHz or better.
Better than 800 X 600 graphics card and display monitor.
Windows W2000, XP with 128 MB RAM or better
An available USB 2.0 or USB 1.1 port.
For graph and label printing:
Any Windows compatible, laser or ink jet, color or black and white,
printer.
Avery 05160 labels are required for label printing.
Prices subject to change without notice
January 19, 2006